Abstracts and presentations

Wednesday 8 April 2015

PLENARY LECTURE 1
Jose Sánchez, Tamara Blanco – Airbus, Spain: PLENARY LECTURE 1- PRESENT AND FUTURE OF COMPOSITE MATERIALS IN THE CIVIL AERONAUTICAL INDUSTRY

Session 1
Theme: Test methods – Design

• F. Pierron & X. Gu: TOWARDS THE DESIGN OF A NEW STANDARD FOR COMPOSITE STIFFNESS IDENTIFICATION
• T. Bru, R. Olsson & G.M. Vyas: A IOSIPESCU SANDWICH SPECIMEN FOR PREVENTION OF PREMATURE FAILURE
• Gergely Czél, Meisam Jalalvand & Michael Wisnom: ADVANCED EXPERIMENTAL TECHNIQUES FOR DETERMINATION OF THE TENSILE AND COMPRESSIVE FAILURE STRAIN OF CARBON/EPOXY COMPOSITES
• Jānis Andersons, Jānis Modniks & Roberts Joffe: AN IMPROVED METHOD FOR IDENTIFICATION OF THE INTERFACIAL SHEAR STRENGTH BY TENSILE TESTS OF SHORT-FIBER COMPOSITES
• Davi M. Montenegro, Francesco Bernasconi, Rafael Libanori, Markus Zogg, Paolo Ermanni & André R. Studart: MODE I NONLINEAR FAILURE BEHAVIOR OF 900-LAYERS OF GLASS FIBER REINFORCED POLYMERS

Session 2
Theme: Test methods – Property measurement I

• Gergely Czél, Meisam Jalalvan, Michael R.Wisnom, Luis P. Canal, Carlos D. González & Javier LLorca: EXPERIMENTAL DETERMINATION OF THE MODE II COHESIVE LAW OF UD HYBRID COMPOSITE INTERFACES USING FULL DISPLACEMENT FIELDS
• David Mollenhauer, Sirina Safriet, Michael Sutton, Hubert Schreier & Eric Zhou: VOLUMETRIC STRAIN DISTRIBUTION WITHIN A REINFORCED RUBBER: A NUMERICAL AND EXPERIMENTAL INVESTIGATION
• Patricia F. Díaz-Maroto, Antonio Fernández López & Alfredo Güemes: FIBRE OPTIC DISTRIBUTED SENSING: A POWERFUL TOOL FOR STRUCTURAL TESTS
• S. Daggumati, S. Krishnamurthy, S. Subramanian, D. Joshua: MICRO-LEVEL STRAIN EVALUATION USING DIGITAL IMAGE CORRELATION
• Ralph Bochynek, Matthias Berner & Albert Langkamp: NOVEL TESTING AND ANALYSIS METHODS FOR THE STRAIN RATE AND TEMPERATURE DEPENDANT MATERIAL CHARACTERISATION OF COMPOSITES

Session 3
Theme: Damage and failure mechanics

• T.E. Tay, U. Kureemun & M. Ridha: BIAXIAL TENSILE-COMPRESSIVE PROGRESSIVE DAMAGE BEHAVIOUR OF NOTCHED AND UNNOTCHED CARBON-EPOXY CROSSPLY LAMINATES
• M. Loukil, A. Pupurs, E. Marklund & D. Mattsson: DAMAGE RESISTANCE PROPERTIES OF THIN-PLY CARBON FIBER/EPOXY LAMINATES
• Rui Marques & Hugo Faria: A NUMERICAL AND EXPERIMENTAL STUDY ON THE FAILURE STRENGTH OF COMPOSITE TUBES SUBJECTED TO BIAXIAL LOADING
• Israel G. García, Jesús Justo, Annaëlle Simon, Federico París & Vladislav Mantič: EXPERIMENTAL EVALUATION OF THE THICKNESS EFFECT ON THE TRANSVERSE STRENGTH OF INNER PLIES IN [0, 90]S CROSS-PLY LAMINATES
• Bas Tijs, Wouter Wilson, Steyn Westbeek & Max Markestein: MORI-TANAKA MEAN-FIELD HOMOGENIZATION BASED FAILURE PREDICTIONS OF A SHORT FIBER COMPOSITE BUTT-JOINT

Session 4
Theme: Fracture

• Guillaume Frossard, Martin Boesiger, Joël Cugnoni, Thomas Gmür & John Botsis: MODE I FRACTURE OF THIN-PLY CARBON-EPOXY LAMINATES: EFFECTS OF PLY AND SPECIMEN THICKNESS
• Silvestre T. Pinho, Rita Teixeira &Paul Robinson: DOES THE TRANSLAMINAR FRACTURE TOUGHNESS OF A 0° PLY-BLOCK DEPEND ON ITS THICKNESS?
• Gianmaria Bullegas, Silvestre T. Pinho & Soraia Pimenta: IMPROVING TRANSLAMINAR TOUGHNESS OF THIN-PLY LAMINTES THROUGH A BIO-INSPIRED CRACK DEFLECTION TECHNIQUE
• Ortega, P. Maimí & E. V. González: CHARACTERIZATION OF INTRALAMINAR FRACTURE COHESIVE LAW

Thursday 9 April 2015

PLENARY LECTURE 2
L. Li,2, Y. Swolfs, V. Carvelli, Stepan V. Lomov – KU Leuven, Belgium: CLUSTER ANALYSIS OF ACOUSTIC EMISSION SIGNALS FOR 2D AND 3D WOVEN CARBON AND GLASS FIBER/EPOXY COMPOSITES

Session 5
Theme: Test methods – Property measurement II

• G. P. Battams & J. M. Dulieu-Barton: DATA-RICH CHARACTERISATION OF DAMAGE IN COMPOSITE MATERIALS DURING INTERMEDIATE STRAIN RATE LOADING
• Marco L. Longana, Janice M. Dulieu-Barton & Fabrice Pierron: IDENTIFICATION OF THE STRAIN RATE DEPENDENCE OF THE ELASTIC PROPERTIES OF CFRP USING DIGITAL IMAGE CORRELATION
• Torin Quick, Sirina Safriet, David Mollenhauer, Robert Wheeler & Chad Ryther: IN-SITU MICRO-COMPRESSION OF UNIDIRECTIONAL POLYMER MATRIX COMPOSITES
• Christof Hirth, Hannes Koerber, Juergen Grosser & Markus Wolfahrt: STRAIN RATE EFFECT ON THE LONGITUDINAL TENSILE STRESS-STRAIN RESPONSE OF COST EFFECTIVE UNIDIRECTIONAL GLASS/EPOXY COMPOSITES
• F. Lahuerta, R.P.L. Nijssen, F. P. van der Meer & L. J. Sluys: INFRARED INSPECTION OF THICK LAMINATES DURING FATIGUE TESTS

Session 6
Theme: Micromechanics

• Abderrahmane Ayadi, Hedi Nouri, Sofiane Guessasma & Frederic Roger: PROOF OF ORTHOTROPIC MECHANICAL BEHAVIOR OF A SHORT GLASS FIBRE REINFORCED THERMOPLASTIC BASED ON X-RAY TOMOGRAPHY AND MULTI-SCALE FINITE ELEMENT COMPUTATION
• Camilla Osmiani, Galal Mohamed, Giuliano Allegri & Ivana K. Partridge: EXPLORING THE INFLUENCE OF MICRO-STRUCTURE ON THE MECHANICAL PROPERTIES AND CRACK BRIDGING MECHANISMS OF FIBROUS TUFTS
• M. Herráez-Matesanz, C. González & C. S. Lopes: A COMPUTATIONAL MICROMECHANICS APPROACH FOR PLY PROPERTIES OPTIMIZATION
• Yasmine Abdin, Atul Jain, Ignaas Verpoest & Stepan V. Lomov: MICRO-MECHANICS BASED MODELING AND VALIDATION OF THE DAMAGE BEHAVIOR OF SHORT WAVY FIBER COMPOSITES
• Brian Nyvang Legarth & Qingda Yang: KINKING CRACKS IN COMPOSITES

Session 7
Theme: Delamination – Parameter identification

• Reidar K. Joki, Frode Grytten, Brian Hayman & Bent F. Sørensen: DETERMINATION OF MIXED MODE COHESIVE LAW FOR DELAMINATION WITH LARGE SCALE BRIDGING
• M. Olave, I. Vara, H. Husabiaga, L. Aretxabaleta, S.V. Lomov & D. Vandepitte: MODE II FRACTURE TOUGHNESS MEASUREMENTS OF WOVEN LAMINATES: UNIT CELL SIZE EFFECT
• Carlos Sarrado, Albert Turon, Jordi Renart & Josep Costa: EFFECT OF THE ADHERENT AND ADHESIVE THICKNESS ON THE FRACTURE TOUGHNESS AND COHESIVE LAW OF FM300 ADHESIVE
• J. Renart, L. Carreras, J. Costa & A. Turon: DETERMINATION OF CRACK GROWTH RATE CURVES IN MODE II TESTS BY MEANS OF THE COMPLIANCE REAL TIME MONITORI

Session 8
Theme: Delamination – Modelling

• Daniel Svensson, K. Svante Alfredsson & Ulf Stigh: MIXED MODE INTERLAMINAR FAILURE – THEORY AND EXPERIMENTS
• F.Mujika, A. Boyano, J. Bonhomme, V. Mollón, J. de Gracia & A. Arrese: ANALYTICAL AND NUMERICAL APPROACH OF A ENF SPECIMEN WITH A CYLINDRICAL INSERT FOR PROMOTING MIXED MODE I/II INTERLAMINAR FAILURE
• E. Farmand-Ashtiani, J. Cugnoni & J. Botsis: TRACTION-SEPARATION RELATION IN DELAMINATION OF CROSS-PLY LAMINATES: EXPERIMENTAL CHARACTERIZATION AND NUMERICAL MODELING

Friday 10 April 2015

PLENARY LECTURE 3
Endel Iarve, WPAFB, USA: LAMINATED COMPOSITES: MODELING AND VALIDATION

Session 9
Theme: Material Models

• S.A. Tabatabaei & S.V. Lomov: INVESTIGATION OF THE VOLUME REDUNDANCY AND INTERPENETRATION PROBLEMS IN MESO-FEM OF FIBRE REINFORCED COMPOSITES USING EMBEDDED ELEMENT METHOD
• L. Pupure, R. Joffe & J. Varna: IDENTIFICATION OF PARAMETERS FOR DIRECT AND INVERTED MODEL TO PREDICT PERFORMANCE OF MATERIALS EXIBITING NON-LINEAR VISCOELASTIC BEHAVIOR
• I.Martín, F.Rodríguez, A.Fernández-López & J. Sánchez: MODELING HEAT TRANSFER ON AN ISC MANUFACTURING PROCESS WITH THERMOPLASTICS
• Yentl Swolfs, Gergely Czél, Meisam Jalalvand, Michael Wisnom, Ignaas Verpoest & Larissa Gorbatikh: MODEL VALIDATION OF THE HYBRID EFFECT IN CARBON/GLASS HYBRID COMPOSITES
• Soraia Pimenta & Paul Robinson: WAVY-PLY SANDWICH WITH CRUSHABLE CORE: DESIGN, SIMULATION AND TESTING

Session 10
Theme: Fatigue

• Atul Jain, Yasmine Abdin, Stefan Straesser, Wim Van Paepegem, Ignaas Verpoest & Stepan V. Lomov: VALIDATION OF THE MASTER SN CURVE APPROACH FOR SHORT FIBER REINFORCED COMPOSITES
• F. Warzok, S.R. Hallett, G. Allegri & M. Gude: ON THE DEGRADATION BEHAVIOUR OF Z-PINS UNDER CYCLIC LOADING CONDITIONS
• G. Martakos, J.H. Andreasen, C. Berggreen & O.T. Thomsen: INTERFACIAL CRACK ARREST IN SANDWICH BEAMS USING A NEW TYPE OF CRACK ARRESTER
• G. Martakos, J.H. Andreasen, C. Berggreen & O.T. Thomsen: INTERFACIAL CRACK ARREST IN SANDWICH BEAMS USING A NEW TYPE OF CRACK ARRESTER
• J.A. Glud, L.C.T. Overgaard, J. Dulieu-Barton & O.T. Thomsen: INTRALAMINAR FATIGUE CHARACTERIZATION OF GFRP LAMINATE USING LOCK-IN DIC AND TSA FOR USE IN MICRO-MECHANICS BASED MULTIAXIAL FATIGUE MODEL

Session 11
Theme: Impact

• Jesús Pernas-Sánchez, José Alfonso Artero-Guerrero, David Varas & Jorge López-Puente: ANALYSIS OF CARBON/EPOXY COMPOSITE LAMINATES SUBJECTED TO HIGH VELOCITY ICE IMPACTS 2015
• Yi Liv, G. Guillamet, E.V. González, J. Costa & J.A. Mayugo: EXPERIMENTAL STUDY OF COMPRESSION AFTER IMPACT STRENGTH OF TAILORED NON-CONVENTIONAL LAMINATES
• Nathalie Godin, Pascal Reynaud, Mohamed R’Mili & Gilbert Fantozzi: DAMAGE SENSITIVITY AND ACOUSTIC EMISSION OF SIC/SIC COMPOSITE DURING STATIC FATIGUE TEST AT INTERMEDIATE TEMPERATURE AFTER IMPACT DAMAGE: TOWARD LIFETIME PREDICTION